Falcon Transfer Chair
The Falcon Transfer Chair's innovative design makes transferring patients from bed to chair a breeze! No more back-breaking manual transfers or awkward patient hoists to deal with!
The height adjustment handle allows the seat height to be adjusted to facilitate transfer between surfaces of different heights. Patients can also sit comfortably in the chair for a long time, with extendable footrests and a cushion included.
Patients can also be wheeled over a toilet to allow them to discharge their bowels directly into the toilet bowl. This is much more hygienic and convenient for the caregiver compared with traditional commodes. The transfer chair is water proof, so patients can also shower while seated on the chair, immediately after passing motion.
Say goodbye to back-breaking patient transfers. Buy the Falcon Transfer Chair now!
a) The Transfer Chair is not designed for people who are very weak or completely bedridden. The user should still be able to sit upright, hold the armrests and lift the buttocks up by about 3 inches, in order for the seat plates and/or cushion to slide underneath.
b) The seat plates need to open in order for the user to get in and out of the Transfer Chair. A minimum clear space of 38" is needed, and it cannot be obstructed by armrests, bedrails or walls. Please check that the furniture and toilet where you plan to use the Transfer Chair has sufficient clear space.
c) The overall width of the Transfer Chair is 24" for the 19" version, and 28" for the 20" version. Do check your door widths to make sure the Transfer Chair can go through.
d) The maximum seat height of the Transfer Chair is 22.8". Please check that the height of the bed and other furniture you plan to use the Transfer Chair with is lower than 22.8".
e) The rear wheels need to glide beneath the furniture in order for the seat plates to go over it. Please check the measurements below to make sure there will be no obstruction.
f) The chair is designed to be pushed on hard, level flooring. As such, it may be difficult to push it over carpets, thick rugs and small curbs. Please also check the measurements below to ensure there is no vertical obstruction to the base frame.
g) The seat plates are made of steel, which can be hard and cold, with an 8.5" hole in the center. Some users may find it comfortable sitting on it for toileting purposes.
Additional Video: How to Assemble the Falcon Transfer Chair
- Wheels come with individual brakes for safety while transferring.
- Seat height is adjustable to suit the bed, chair or toilet, which may all be of different heights.
- Double-locking system to prevent chair from opening accidentally.
- Cushion provided for comfortable seating over longer periods of time.
- Weight capacity of 264 lbs.
- Wheels are silent, suitable for use in quiet places like hospitals.
Transfer Chair Specifications
19" Seat - 24" / 20" Seat - 28"
|Overall Height||31" - 38" adjustable|
|Seat Width||Choice of 19" or 20"
|Seat-to-Floor Height||16.0" - 22.8" adjustable
|Front Wheel Diameter||5"|
|Rear Wheel Diameter||3"
Ground Clearance Required
Horizontal Clear Space Required
|Loading Capacity||264 lbs
|Net Weight||19" - 56 lbs / 20" - 57 lbs